Industrial Precision. At Scale.
A full tour of the machines, processes, and quality systems that deliver ±0.1mm tolerance on every component we produce.
±0.1mm
Cutting Tolerance
0%
Defect Rate Target
3
QC Checkpoints
12
CNC Machines
Production Equipment
Three core machine categories. Each one purpose-built for a specific stage of the production process.
CNC Panel Saw & Router
Our industrial CNC routers handle panel cutting, profiling, and contour routing in a single automated pass. Automatic tool-changing eliminates manual intervention between operations — every cut is executed from your CAD file with zero interpretation.
±0.1mm
Cutting Tolerance
2440 × 1220mm
Max Panel Size
24,000 RPM
Spindle Speed
12-station ATC
Tool Positions
- Panel cutting to ±0.1mm tolerance
- Contour and profile routing
- Dado and groove machining
- Nested-based manufacturing (NBM)
- Automatic tool changing mid-job
Automated Edge-Banding Line
Our fully automated edge-banding line applies PVC and ABS edging at production speed — consistent adhesion, flush trimming, and zero lifting on every linear metre. Hot-melt glue application is temperature-controlled for each material type.
Up to 20m/min
Feed Speed
0.4mm – 3mm
Edge Thickness
PVC, ABS, Veneer
Materials
Down to R1mm
Corner Radius
- PVC, ABS, and wood veneer edging
- Automatic glue temperature control
- Flush top/bottom trimming
- Corner rounding (R1–R3mm)
- Buffing and polishing finish
CNC Drilling & Boring Centre
CNC drilling centres bore hardware holes at exact coordinates from your CAD file. Hinge cups, drawer runner holes, shelf pin holes, and connector bores are all drilled in a single automated cycle — no manual marking, no misalignment.
±0.05mm
Positioning Accuracy
Up to 21 simultaneous
Spindles
5mm – 50mm
Hole Diameter
70mm
Max Depth
- Hinge cup boring (35mm Blum standard)
- Drawer runner hole patterns
- Shelf pin drilling (32mm system)
- Connector and cam lock boring
- Multi-spindle simultaneous drilling
Three-Stage Quality Control
Every component passes three independent checkpoints before it leaves the factory. Not one. Three.
Incoming Material Inspection
Every board is measured for thickness, moisture content, and surface defects before entering the production line. Non-conforming material is rejected at intake.
In-Process Dimensional Check
Operators perform spot-checks at each machine station using calibrated gauges. First-off parts are verified against CAD dimensions before batch production begins.
Pre-Packing Final Inspection
Every component is visually inspected and cross-referenced against the cut list before packing. Parts that don't meet spec are remade — not shipped.
Our Guarantee
Parts that don't meet spec are remade — not shipped.
If a component fails our pre-packing inspection, it is remade at no additional cost before your order is dispatched. No exceptions.
0%
Defect Target
Your Files Go Directly to Machine Code
We don't redraw your designs. We don't interpret your dimensions. Your DXF or DWG file is imported directly into our CAM software, nested for material efficiency, and converted to machine code — with a human engineer reviewing the output before production begins.
This eliminates the single biggest source of error in traditional carpentry production: the translation from drawing to workshop floor.
X: 0.000 Y: 0.000
ORIGIN LOCKED
Panel K / Krystal Panel™ — Certified Spec Sheet
A mineral-core plywood we stock and machine to your drawings. Every order ships with the test documentation below — ready for Green Mark submissions, QP sign-off, and client compliance packs.
| Property | Result | Standard / Lab |
|---|---|---|
| Product | Panel K / Krystal Panel™ — TK Series multi-functional plywood | Foshan Yuankui; SG rep EWINS Pte Ltd |
| Core construction | Mineral-bonded: eucalyptus ~65% + magnesium-mineral matrix ~35% (no formaldehyde glue) | Per TÜV SÜD composition data |
| Formaldehyde | 0.01 mg/m³ (limit <0.1) | TÜV SÜD PSB · ASTM D5116 / SGLS Cat 41 |
| TVOC | <0.1 mg/m³ (limit <0.5) | TÜV SÜD PSB |
| Heavy metals / phthalates / flame-retardants / solvents | Not detected | TÜV SÜD PSB |
| Green Label | Certified — Category 41: Panel Boards (cert 041-145-4478, to Oct 2027) | Singapore Environment Council (SGLS) |
| Termite resistance | Termite survival 0.4% vs 52.4% control; mass loss 5.8% vs 57.6% | Guangdong Forest Products · GB/T 18260-2015 |
| Water / moisture | Marine-grade bond 1.07 N/mm² after 24-hr soak (Level 3) | Beijing ZKGX · BS 1088:2018 |
| Fire | Class 2 surface spread of flame; SG Certificate of Conformity (wall/ceiling), to 2031 | TÜV SÜD PSB · BS 476 Pt 6 & 7 |
| Tested thickness / density | 18 mm · 600 kg/m³ | TÜV SÜD PSB |
Ready to put our machines to work?
Submit your CAD files and receive a full production quote within 24 hours.